Rob Papen RP-Distort Free Download Latest Version  for Windows. It is full offline installer standalone setup of Rob Papen RP-Distort Crack mac for 32/64.

Rob Papen RP-Distort Free Download Latest Version  for MAC OS. It is full offline installer standalone setup of Rob Papen RP-Distort Crack Serial key for macOS.

Rob Papen RP-Distort Overview

RP-Distort is not just a distortion unit, but much more. The distortion unit inside RP-Distort can be combined with an analog modelled filter, compressor and widener unit.

These units can be re-order, but also can be turned on or off. So in case you only want a great analog modelled filter… RP-Distort can offer this. Or only the unique widener unit which is great for widening a boring mono track.

On top of that, the controls can be modulated using midi sources or by one of the 4 build in LFO?s that can sync to your host tempo..

The distortion unit offers 33 distortion types included ring modulator, FM, two band distortions and lo-fi. Inside this section you can also find the EQ and noise-gate.

RP-Distort is in fact a wicked FX unit that will distort or alter your tracks in an inspirational way!

Features of Rob Papen RP-Distort

Below are some noticeable features which you’ll experience after Rob Papen RP-Distort free download.

• Uses sound banks composed of 128 presets.
• Preset handling with copy, paste, clear and compare function.’Quick Browser’, ‘Recently Browsed’ and ‘Favorite’ functions.All settings are stored inside each preset.
• Presets are stored in clear categories banks.

• External controller hardware (fader-box) settings can be saved and restored.

• On/Off function.
• Amp Simulator
  Amplifier simulation effect. Several types of amp types are simulated. Great for creating edgy sounds.Type of amp simulation. Settings are:- None, 4×10″ guitar speakers, 4×12″ guitar speakers, Bass speaker, Combo speaker and Radio speaker.Distort Amount of distortion added to the sound.
• Cabinet Simulator
  Several types of cabinet types are simulated. Great for creating edgy sounds.Type of cabinet simulation. Settings are:- None,Fender,Marshall & Off Axis.Distort Amount of distortion added to the sound.
• Clipper
  Hard clipper, this limits output which is to above or below the set clipping levelNegative The clipping level for the negative signal. From 0% (no clipping) to 100% (maximum clipping).Positive The clipping level for positive signal. From 0% (no clipping) to 100% (maximum clipping).Amount, the amount of clipping from 0% (no clipping) to 100% (fully clipped)
• Cos
  Cosine distortion effect.Frequency, Frequency of the cosine effect.Amount, Amount of cosine distortion
• Cross 1
  Cross, Position for cross distortionAmount, Amount of cross distortion
• Cross 2
  Negative Cross distortion position for the negative signalPositive Cross distortion position for the positive signal.Amount, Amount of cross distortion.
• Foldover
  Fold-over distortion, this amplifies and then ‘folds over’ the sound.Frequency Frequency of the fold-over distortion.Amount, Amount of fold-over distortion
• Fuzz
  Fuzz-box distortionFrequenter Frequency of the fuzz-distortion effectAmount, Amount of fuzz distortion
• Gapper
  Gapper distortion,Frequency Frequency of the gapper distortion effectAmount, Amount of fuzz distortion
• Hard-limiter
  Hard limiter, this limits output which is to above or below the set limit level and thenboosts the signal.Limit The clipping level for the signal. From 0% (no limiting) to 100% (maximum limiter).Amount, The amount of post-limiting boosting.
• Low-Fi
  Low-Fi effect, this reduces the sample & bit rate & adds noise to the signal.Bits Bit level of the signal.Sample Rate Sample rate of the signal.Noise Amount of noise added to the signal.
• OverDrive
  Over-drive effectDrive, Drive for the over-drive effectAmount Over-drive mixing amount.
• Octave 1
  Octave effect, this shifts the sound up an octave, Negative Mixing for the negative signal. Positive Mixing for the positive signal.
• Octave 2
  Octave effect type 2,Frequency Frequency of the octave effect.Amount, Amount of octave effect.
• Power
  Power wave-shaping effect.Drive, drive for the power effectAmount, Power mixing amount.
• Rectify
  Rectifies the signal, by multiplying the negative signalRectification Rectification of the negative signal, from -100% (no rectification), 0% (half rectification) to 100% (full rectification)  Amount, Rectification mixing amount.
• Ring Modulation
  The ring modulates (multiplies) different signals together depending on the type.Type Sine, Saw, Sqr & Tri, multiplies the input with the set oscillator.Frequency Sets the oscillator frequency.Amount Sets the ring modulation amount.
• Saturate
  Saturation effect.Saturation Saturation levelAmount Saturation mixing amount
• SoftLimit
  Soft-limiter effectAmount Soft-limiter amount
• Squarify
  Squares the signal (turns it to a square wave), and then lowpass filter it.Negative Amount the negative signal is turned to a square wavePositive Amount the positive signal is turned to a square waveFilter Amount this square wave is lowpass filtered.
• Transient
  Distorts the transients, i.e. the beginnings of sounds.Range Transient rangeAmount Transient distortion amount.
• Tube Simulator
  Tube distortion effect, by saturating, limiting, rectifying and bandpass filtering the input.Limit, Hard limiter threshold.Rect Amount of rectification, from -100% (no change), 0% (half) to 100% (full).Saturate Amount of saturation..Tone Frequency of the band pass filter.Emphasis Bandwidth of the band pass filter.
• Atan
  Mathematically determined distortion effect based, which distorts the sound by waveshaping using an arc-tan function.
• Clipper 2
  This effect provides another interpretation of a clipping distortion. Symmetry control is added for further sound shaping.
• FM
  This effect uses the input to modulate the frequency of an oscillator generated by RP DISTORT.
• Waveshaper
  The waveshaper effects waveshapes the low & high signal differently and then pass it through a low-pass filter.
• Two Band
  The last seven distortion effects come in two-band varieties. These are Two Band Cos, Fuzz, Limiter, OverDrive, Power, Rectification and Saturation.
  The two band varieties work in the same manner as their single-band version but are able to process two different parts of the input signal separately. RP DISTORT splits the input signal in a low and a high frequency band. The split frequency determines the cutover point. The low and high band are the then separately distorted, and then mixed back together, using the mix control,
  The two band effects allow you for instance to maintain a solid tight bass with screaming high frequency material on top from a single wide band input signal.

• 4 Band Equalizer effect.
• On/Off function.
• Low 125 Hz volume | Mid 1 500 Hz volume | Mid 2 2 kHz volume | High 8 kHz volume.

Noise gate (inside the distortion section):

• Noise gate unit, the noise-gate is an audio effect that removes any sound (gates) that is below a threshold volume.
• On / Off function.
• Threshold / Attack / Hold / Release paramaters.

• RP-Distort has a low & high pass filter, in the order low-pass filter then high-pass filter.
• On/Off function.
• 12 / 24dB Selects between a 12dB and a 24dB filterLow Frequency of the low pass filter.
• Low Q Resonance of the low pass filter.
• High Frequency of the high pass filter.
• High Q Resonance of the high pass filter.

• audio compressor with on/off selector
• threshold, ratio, attack, release and volume paramters

• 4x free modulation routings with amount control.
• 4x LFO with, tempo based sync mode,  waveform, speed, human feel, symmetry control
• bypass button for all active modulations
• global amount control for all active modulations

Rob Papen RP-Distort Technical Setup Details

• Software Full Name: Rob Papen RP-Distort
• Setup File Name: Rob Papen RP-Distort.zip
• Setup Type: Offline Installer / Full Standalone Setup
• Compatibility Architecture: 32 Bit (x86) / 64 Bit (x64)

HOMEPAGE:- https://www.robpapen.com/rp-distort.html

System Requirements For Rob Papen RP-Distort

Before you start Rob Papen RP-Distort free download, make sure your PC meets minimum system requirements.

Mac OS X 10.7 | 10.8 | 10.9 | 10.10 | 10.11 | macOS Sierra

 Windows XP | Vista | 7 | 8 | 8.1 | 10 [32-bit | 64-bit]

Rob Papen RP-Distort Free Download

Click on below button to start Rob Papen RP-Distort Free Download. This is complete offline installer and standalone setup for Rob Papen RP-Distort. This would be compatible with both 32 bit and 64 bit windows.

Click on below button to start Rob Papen RP-Distort Free Download. This is complete offline installer and standalone setup for Rob Papen RP-Distort. This would be compatible with macOS.

Re-upload please!

Please complete the required fields.

Your Name

Email

Reason (required)
This post contains broken linksPost has incorrect informationPost has spam

Description

Submit